Mac OS: Browser. Connect the Wireless Media Drive to your PC with the USB cable. Copy the downloaded file (sandiskmediadrive.img) to the Media Drive. Unplug the Wireless Media Drive from the computer and launch the App. Once the App starts either of the following popup messages will appear asking to upgrade the firmware. Drag the update file onto the Drive. Make sure to put it in the root or main directory and not in a sub folder. Safely eject the wireless drive On a Windows Computer, go to My Computer, right-click on the Wireless Flash Drive, then choose Eject. On a Mac computer, find the Wireless Flash Drive on your desktop and right-click on it, then.

You can connect to the Wireless Drive Wi-Fi network on your mobile device, PC, or Mac without downloading the Wireless Flash Drive app, by using a web browser. There are two methods of connecting without using an app.

METHOD 1 - Connecting without Internet connection

1. Make sure your SanDisk Connect Wireless Flash Drive is turned on.
2. Connect to the SanDisk Flashxxxx Wi-Fi network.
NOTE: You must connect to the Wi-Fi network without Internet connection.
3. Open an Internet browser.
4. Go to www.sandisk.com/wfd/ to connect to the wireless drive.
METHOD 2 - Connecting with Internet connection

Sandisk Connect Wireless Flash Drive App For Mac

1. Configure the WFD to connect to your home network
2. Disconnect from the WFD SSID and reconnect to your home network
3. Launch the Wireless Flash Drive app and select the WFD

4. Click the gear to open settings

5. Scroll to the bottom and select about

6. Select the Wireless Flash Drive under Drives

Sandisk Wireless Flash Drive Software

7. Take note of the IP address listed at the top of the about page

8. On your desktop or laptop computer open your web browser and in the address field type the WFD IP address and press enter to access the WFD